What are the environmental factors that affect the detailed carving and milling process and the details that should be paid attention to in use

[1]Environmental factors affecting fine carving and milling

1.The influence of power supply on processing is direct,mainly manifested in the disorder of control system.Due to the careful carving and milling,each electronic device and each functional component have a certain voltage and frequency range.The overload operation of any part will inevitably lead to the instability of the whole system.The common phenomenon is machining offset;

2.The influence of vibration is reflected in the frequent use of short knives and the unsmooth surface.The common reasons are that the machine tool is touched during processing,the installation levelness of the machine tool is unqualified,and there is a punch around;

3.Ambient temperature and humidity mainly affect the performance of control system and driving motor.When the ambient temperature exceeds 40℃,the control system may have wrong control,and the driving torque of the driving motor may not reach the rated value.

Fine engraving and milling applicable industries

Engraving,drilling and cutting of non-metallic materials and metal materials such as aluminum and copper:electronic fixture,acrylic panel,bakelite,synthetic stone,glass fiber board,glasses board,gypsum blister mold,wooden shoe mold,bronzing mold,glue dropping mold,red copper electrode,etc.

[2]What details should be paid attention to when using fine carving and milling parts

A variety of materials can be used for detailed engraving and engraving.However,there are many details that need to be paid attention to in the process of use.Although they are small details,they can not be ignored,because these small details are directly related to the excellence of carving.

You should pay attention to the following points when carving and milling parts:

1.The continuous operation time shall not exceed ten hours every day.Check the cleanliness of the cooling water regularly to confirm the normal operation of the water pump.

In order to avoid insufficient water in the spindle motor,the cooling water needs to be changed frequently.

2.At the end of each day's work,the dust,particles and sundries on the transmission system and the table should be cleaned to prevent them from affecting the next carving workpiece.

3.The polished rod and screw rod on the fine carving and milling parts need regular maintenance.Generally,the polished rod can be maintained with oil,while the screw rod can be maintained with high-speed butter.

In cold weather,in order to avoid too much resistance in the transmission part,clean the polished rod and screw rod with gasoline.

4.If two or more people are required to operate during operation,they should pay attention to assigning tasks to each other.During operation,they should wear gloves and do not tear off or move the warning signs marked on the equipment,so as to avoid personal injury caused by careless operation in the future.

When using fine engraving and milling parts,if you don't pay attention to it,it will affect the engraving accuracy of the workpiece.Our technicians suggest paying attention to the above small details when using them at ordinary times,which can not only improve the utilization rate of engraving and milling machine,but also make the engraving work go smoothly.