Company dynamics-Nanpi Runjie Hardware Manufacturing Co., Ltd

Information Center





Current location:HOME > News > Company dynamics >

Information Center

04-09 

When designing the structure of metal stamping parts, how to produce thick and high burr around the s

[1] How to design the die structure is conducive to reduce the springback of stainless steel metal stamping parts. Springback during bending processing of stainless steel metal stamping parts is a special problem that is ...

09-23 

The processing of stamping and stretching parts is powered by conventional or one-to-one stamping equ

The processing of stamping and stretching parts is a production technology of product parts with the help of the power of conventional or stamping equipment to make the sheet directly subjected to the deformation force an...

09-23 

What is the standard temperature of the motor housing

The motor shell is the yoke of the stator. If it is thinned, the magnetic circuit may be affected. If the magnetic circuit is saturated, it will lead to the increase of motor speed, current, temperature and noise. Of cour...

09-23 

Introduce you to the disassembly of the motor housing

To introduce the disassembly of the motor housing: when pulling out the rotor, be careful not to damage the stator coil. If the rotor weight is small, you can pull it out by hand; If the weight is large, it should be lift...

First 1 [2] Next Last

Address:Dashujin Industrial Zone Chengbei, Nanpi County, Hebei Province

Sales Hotline:
Manager Zhang：13643282675
Manager Zhang：15231667166

Email：rjwjzz@163.com

- Runjie Hardware -